WELCOME TO MARINE TEAK

The Nautic Star Classic is a straight edged classically designed and hand-crafted teak table.

The Classic is rectangular in shape with bevelled corners and has a 4mm raised lip along all four sides. Each slat of this table has been carefully hand selected to ensure that the colour is uniformed throughout. The centre of the table has the traditional stylish embedded compass rose which adds even more elegance and quality to the finished product.  

This table looks fantastic in any cockpit, salon and flybridge and would be a superb addition to your vessel.

The Classic is constructed around a twice epoxy treated 12mm thick plywood core with 4 mm thick teak slats applied to the plywood surface. A black caulking compound is used between each slat. This results in the overall depth of the Square being a total of 16mm, this in not including the raised edging.

Delivered to you in a natural state, it is ready to be installed in your boat. However, depending on your needs or environment you may want to treat it - we strongly recommend the use of Semco Natural teak sealer if so, which is available under the Teak Sealer section.

The Nautic Star Square is available in three sizes.

If you need a table larger than 900mm, take a look at the Nautic Star Soft - available in six sizes and rounded corners.

The teak used is sourced solely from fully grown trees taken from large plantations which are carefully managed by Indonesia's own forestry department. The manufacturers also hold an FSC Chain of Custody environment certificate, making them one of very few companies in the marine industry able to deliver FSC Certified products.